how to make 35 remington brass

Creating .35 Remington brass from other cartridge cases can be a cost-effective way to obtain brass for reloading. Here’s a general guide on how to make .35 Remington brass from .30-30 Winchester brass, as this is a common method:

Please Note: Always ensure you are following local laws and regulations related to firearms and ammunition when performing any reloading activities.

Materials Needed:

  • .30-30 Winchester brass cases
  • Reloading press
  • .35 Remington resizing die
  • Case trimmer
  • Lubricant for resizing
  • Chamfer and deburring tool
  • Calipers
  • Case mouth expander (if necessary)


1. Gather Materials:

  • Ensure you have all the necessary equipment and materials.

2. Inspect Brass:

  • Examine your .30-30 Winchester brass cases to ensure they are in good condition and free from defects.

3. Resize the Brass:

  • Lubricate the .30-30 Winchester cases to prevent sticking and ease resizing.
  • Use a .35 Remington resizing die to resize the cases. Follow the instructions provided with your reloading die and press.
  • The resizing process will change the shape of the case to match .35 Remington specifications.

4. Trim the Cases:

  • After resizing, check the length of the cases with calipers. Trim the cases to the proper .35 Remington length using a case trimmer.
  • The maximum case length for .35 Remington is typically around 2.039 inches (51.8mm).

5. Chamfer and Deburr:

  • Use a chamfer and deburring tool to remove any burrs or sharp edges from the inside and outside of the case mouth.

6. Check Case Length:

  • Double-check the case length to ensure it falls within the specified range for .35 Remington.

7. Expand the Case Mouth (if necessary):

  • Some .30-30 Winchester brass may need the case mouth slightly expanded to accommodate the larger .35 Remington bullets. Use a case mouth expander if required.

8. Load Your Brass:

  • Now that you have successfully converted .30-30 Winchester brass into .35 Remington brass, you can proceed with the reloading process. Follow your reloading manual and recipe for .35 Remington loads, including selecting the appropriate bullet, powder, and primer.

9. Test Your Reloads:

  • Before using your reloaded ammunition for hunting or shooting, conduct a few test rounds at the range to ensure they function correctly and safely in your firearm.

Please note that reloading ammunition carries inherent risks if done improperly. It is essential to follow established reloading practices, use appropriate equipment, and consult reloading manuals for specific load data and safety guidelines. If you are new to reloading, consider seeking guidance from an experienced reloader or taking a reloading course to ensure safety and accuracy.

Related Articles

Leave a Reply

Back to top button