how to lighten trigger pull on bodyguard

Lightening the trigger pull on a Smith & Wesson Bodyguard pistol can be a delicate process, and it’s essential to prioritize safety while doing so. Before attempting any modifications, make sure you are familiar with your local laws and regulations regarding firearm modifications. If you’re not confident in your ability to perform these modifications, it’s advisable to seek the assistance of a qualified gunsmith.

Here are some general steps you can consider for lightening the trigger pull on a Smith & Wesson Bodyguard:

  1. Unload the Firearm: Always ensure the gun is unloaded and there is no ammunition nearby. Remove the magazine and visually inspect the chamber to ensure it’s empty.
  2. Safety First: Keep the firearm pointed in a safe direction, and your finger off the trigger at all times during this process.
  3. Disassemble the Firearm: Follow the manufacturer’s instructions to field strip the firearm. This typically involves removing the slide, barrel, and recoil spring.
  4. Polish Contact Surfaces: Polishing specific contact surfaces can help reduce friction and may lead to a lighter trigger pull. Use a fine abrasive material like a Dremel with a polishing wheel or fine-grit sandpaper. Focus on areas such as the trigger bar and sear engagement surfaces, but be extremely cautious not to remove too much material, as this can compromise safety.
  5. Replace Springs: Consider replacing the stock trigger return spring with a lighter one, but be cautious not to go too light, as this can lead to reliability issues and unintended discharges. A gunsmith can help you choose an appropriate spring.
  6. Test the Trigger: After making any modifications, carefully reassemble the firearm and function test it. Ensure it passes a drop safety test (where the firearm should not discharge if dropped).
  7. Check Local Laws: Before using your modified firearm, make sure you are compliant with all local laws and regulations.
  8. Seek Professional Assistance: If you are uncomfortable or inexperienced with firearm modifications, it’s best to seek the help of a qualified gunsmith. They have the necessary knowledge and tools to perform these modifications safely and effectively.

Remember that modifying a firearm can have legal and safety implications, and any changes should be made responsibly and with caution. Always prioritize safety when working with firearms, and never compromise the integrity of your firearm to achieve a lighter trigger pull.

Related Articles

Leave a Reply

Back to top button